Description
Suitable for use both in new construction and as a maintenance finish which can be used in a wide
variety of environments including offshore structures, chemical and petrochemical plants, bridges,
pulp and paper mills, and in the power industry.
All surfaces to be coated should be clean, dry and free from contamination. Prior to paint
application all surfaces should be assessed and treated in accordance with ISO 8504:2019.
Primed Surfaces
Interthane 990 should always be applied over a recommended anti-corrosive coating scheme. The
primer surface should be dry and free from all contamination and Interthane 990 must be applied
within the overcoating intervals specified (consult the relevant product data sheet).
Areas of breakdown, damage etc., should be prepared to the specified standard (e.g. Sa2½ (ISO
8501-1:2007) or SSPC-SP6, Abrasive Blasting, or SSPC-SP11, Power Tool Cleaning) and patch
primed prior to the application of Interthane 990.
Clean all equipment immediately after use with International GTA713. It is
good working practice to periodically flush out spray equipment during the
course of the working day. Frequency of cleaning will depend upon amount
sprayed, temperature and elapsed time, including any delays.
All surplus materials and empty containers should be disposed of in
accordance with appropriate regional regulations/legislation.
Technical data sheet > https://international.brand.akzonobel.com/m/618be3ed350110fe/original/Interthane_990_eng_A4_20250312.pdf
Safety data sheet > https://prdakzopreloadersa.blob.core.windows.net/public/DA7DF488320C1EDEAAF7D6FA1B4D5A34/YI_GB_EN_PH404M_INTERTHANE_990_RESEDA_GREEN_PART_A.pdf
